Preventive and Corrective Maintenance
Routine Referral Procedures
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
RRP No. 1: Remove the Electronics Cover
1. Turn Off (O) the printer and disconnect the AC power cord and all data cables.
2. See Figure 35. Remove the electronics cover mounting screw and washer and then close
the media door.
Figure 35 • Remove the Mounting Screw
3. See Figure 36. Remove the four remaining mounting screws securing the electronics
4. Remove the electronics cover by lifting straight up on the bottom lip of the electronics
Note • Retain all parts removed during disassembly, unless otherwise directed.
2Electronics Cover Upper Flange
3Electronics Cover Mounting Screw