Preventive and Corrective Maintenance
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
Clean the Peel-Off Assembly
The Peel-Off option is required.
The Peel assembly consists of several spring-loaded rollers to ensure the proper roller
pressure. Use the peel release lever and your right hand to open and close the Peel assembly.
Doing this will keep your fingers away from the rollers.
If adhesive buildup affects peel-off performance, complete these steps:
1. Press the printhead release latch to open the printhead assembly.
2. Lift the printhead until it latches open.
Caution • Do not use your left hand to assist in closing the Peel assembly. The top edge of
the Peel roller/assembly could pinch your fingers.
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
Caution • The printhead may be hot and could cause severe burns. Allow the printhead to