Preventive and Corrective Maintenance
Personal Safety Tips
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
Personal Safety Tips
Caution • Risk of explosion if battery is replaced by an incorrect type, or in the wrong
Caution • For personnel and equipment safety, always use an approved three-conductor
power cord specific to the region or country intended for installation. This cord must use
an IEC 320 female connector and the appropriate region-specific, three-conductor
grounded plug configuration.
Caution • Beware of “pinch points” on the printers, especially:
Opening and closing the covers
Opening and closing the printhead
Rewind spindle
Platen roller
Peel assembly
Caution • Wear protective eyewear when installing or removing E-rings, C-clips, snap
rings, springs, and mounting buttons. These are under tension and could fly off.
Important • Do not wear loose clothing or jewelry such as rings, watches, or bracelets when
servicing the printers.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com