Loading...
79
Operations
Control Panel LCD Display
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
LENGTH Set Maximum Label Length
Maximum label length is used in conjunction with the calibration
procedure. The value of this setting is the maximum label length that is
used during the media portion of the calibration process. Only a few labels
are required to set media sensors. Always set the value that is at least 1 in.
(25.4 mm) longer than the longest label to be used on the printer.
Selections: AUTO, < 1 I NCH (25.4 mm) to < 39 I NCH (991 mm)
Default Value: AUTO
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
LCD ADJ UST Change LCD Darkness
This parameter changes the darkness of characters on the LCD.
Range: 0 to 19
Default Value: 10
To modify this parameter:
To make the characters on the LCD darker, press the up arrow.
To make the characters on the LCD lighter, press the down arrow.
Table 15 • Printer Parameters, Manufacturing Menu (Page 5 of 7)
Parameter Explanation
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com