DLP Projector – User’s Manual
Network Settings
Control By
Press the▲▼buttons to select projector remote command control.
Selecting RJ45 enables RJ45 control and disables the RS232 port.
Selecting RS232 enables RS232 control and disables the RJ45 network port.
When RS232 control is enabled, the serial port settings are fixed to:
115200 Baud;8-bits;No parity;1 Stop-bit;No flow control
(Range: RS232/ RJ45)
Note: this setting changes the standby power:
RS232 = <0.5W (Default)
RJ45 = <10W
Network Status Press the ENTER/ button to enter the Network Status sub menu.
See Network Status on page 36.
Terms of Use | Privacy Policy | DMCA Policy
2006-2023 Ready to Serve Manuals