Loading...
6 103EQ - Connecting the 103EQ
4 Connecting the 103EQ
Always switch off the power to each device before connecting it to
your 103EQ. After connecting your 103EQ, connect its power and
then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
The 103EQ is always connected between the source and the amplifier.
To connect the 103EQ, as illustrated in the example in Figure 2:
1. Connect the audio source (for example, a microphone via an audio mixer,
the Kramer 102MX) to the 3-pin LINE IN terminal block (see Section 4.1).
2. Connect the LINE OUT 3-pin terminal block to a power amplifier (for
example, the Kramer 920 power amplifier).
3. Connect the 920 power amplifier to the audio acceptor (for example, the
Kramer Galil-2C).
4. Connect the power adapter to the 103EQ and plug the power adapter into
the mains power supply.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com