Loading...
Connecting the FC-31 UXGA to DVI Converter
7
5 Connecting the FC-31 UXGA to DVI Converter
To connect your FC-31 UXGA to DVI Converter, as the example in Figure 3
illustrates, do the following
1
:
1. Connect a computer graphics source (for example, a computer) to the
UXGA IN connector.
2. Connect the DVI OUT connector to a DVI projector.
3. Connect the 12V DC power adapter (wall transformer) to the 12V DC
socket and connect the transformer to the mains electricity.
Figure 3: Connecting the FC-31 UXGA to DVI Converter
1 Switch OFF the power on each device before connecting it to your FC-31. After powering up your FC-31, switch on the
power on each device
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com