— 12 —
Starting and Shutting down the Projector
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The POWER LED on the
Turn on the connected devices.
Ensure the POWER LED not a
flashing. Then press the POWER
button to turn on the projector.
The projector splash screen displays
and connected devices are
See Setting an Access Password
(Security Lock) on page 14 if
security lock is enabled.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
(Component is supported through
the RGB to COMPONENT
After powered on for 3 minutes,
the projector goes into the ED
(Extreme Dimming) mode if the
source cannot be detected within
VGA1 / VGA2: Analog RGB
Composite Video: Traditional composite video
S-Video: Super video (Y/C separated)
HDMI: High-Definition Multimedia Interface