Kramer Electronics Ltd.
KRT-3 – Installing KRT-3
Attaching KRT-3 to a TBUS
You can attach one or more KRT-3 units to the enclosure of any modular Kramer TBUS with
pass-through inserts that are installed inside a table. The KRT-3 units can usually be attached
to the front and rear sides of the enclosure, as the left and right sides are fitted with clamps.
Alternatively, the clamps can be installed on the front and rear sides to enable attaching
KRT-3 to the left and right sides of the TBUS enclosure.
For TBUS models with a sliding lid (for example, TBUS-10xl), you can only use the front side
of the enclosure to mount the KRT-3 units.
Attaching a Single KRT-3 Unit
To Attach the KRT-3 to a TBUS unit:
1. Slide the KRT-3 onto one of the sides of the TBUS enclosure. Make sure to position the
fixed cable downwards and the retractor cable upwards.
Figure 3: Sliding KRT-3 onto the TBUS Enclosure