Loading...
21
DU6871/DW6851/DX6831 DLP Projector - User's Manual
Connecting to the External HDBaseT Transmitter
The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter
(optional), the video, RS-232 and LAN signals can be sent to the projector via a single
RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of
the IR remote control, the control signals from the IR remote control can be sent to the
DU6871/DW6851/DX6831 projector via the RJ-45 cable�
VGA IN RJ45
Lan
HDMI RS232 RJ45
HDBaseT
YPbPr
VGA Cable
DVD Player DVD Player
Hub
RS-232
RJ-45 Cat5e or above
Control PC
Control PC
HDBaseT transmitter
Projector
Note:
The projector supports the video signal, R-232, IR remote control and the reception of the network control
signals but do not support Power over Ethernet (PoE)�
Set the Control -> RS232 -> Channel on the OSD menu to HDBaseT if you want to use the external
HDBaseT transmitter to send the RS232 command to the projector via the RJ45 cable and baud rate will
switch to 9600�
If the command is sent via the HDBaseT transmitter, the longest transmission distance is 100 meters� The
projection may be interrupted or interfered, or the control signal cannot be sent if the transmission distance
is exceeded�
Use the RJ-45 Cat5e or above cable and avoid entwining� Entwining may cause damage, interfere signal
transmission, reduce the transmission distance and degrade the image quality�
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com