Loading...
19
DU6871/DW6851/DX6831 DLP Projector - User's Manual
Connecting to the Control Equipment
The projector has the following control port for connecting to the control equipment:
3D sync signal
transmitter (IR)
HDBaseT / LAN (Network control): The projector supports network control� LAN and
HDBaseT share the port� If only network control is used, you can connect the LAN on the
projector to PC or through the local network� Refer to the remote control guidelines for
detailed information�
RS-232 (RS-232 control): The projector supports RS-232 serial control� The projector
can be remote-controlled by connecting the projector to PC or control system through
the standard 9-pin serial cable (Straight Through Serial Cable)� Refer to the remote
control guidelines for detailed information�
Wired remote control: If the projector cannot receive the IR signal from the remote
control due to the overly long distance or obstacles, you can connect the cable to the
IR remote control or the external IR transmitter (optional) via the WIRE input port to
expand the working range of the remote control�
3D Sync Out: 3D IR sync signal transmitter�
Note:
When the terminal of the remote control cable is inserted to the wired control terminal of the projector, the
projector will automatically switch to the wired control mode and cannot be controlled through the IR signal
of the remote control� Disconnect the wired control terminal on the projector if you want to control through
the IR signal of the remote control�
If the wired remote control cable or the external IR transmitter is inserted to the incorrect port, such as
Trigger, the remote control or the IR transmitter may be damaged� Make sure whether the port is correct
before insertion�
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com