TP-581T, TP-582T and TP582R - Overview
3 Overview
The TP-582T and TP-582R are a high-quality twisted pair transmitter and receiver
for HDMI, 100BaseT Ethernet, bidirectional RS-232 and IR signals.
With the TP-582T you can select one of two HDMI inputs, and convert it with the
100BaseT Ethernet, RS-232 and IR input signals to a twisted pair signal. The
TP-582R converts the twisted pair signal back to 100BaseT Ethernet, RS-232, IR
and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK® audio
outputs. The TP-581T is identical to the TP-582T but has only one HDMI input.
Since the TP-581T has only one input, it does not have the input selection control which the
TP-582T has (that is, contact closure, IR and front panel input selection).
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
The transmitter/receiver pair features:
A maximum data transfer rate of 6.75Gbps (2.25Gbps per graphic channel)
(1080p@60Hz 36-bit) over a range of up to 130m (430ft) when using
BC−HDKat6a cables
HDTV compatibility
HDMI support for Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed
Audio Channels, Dolby TrueHD, DTS-HD, CEC
3D pass-through
HDCP compliance
EDID PassThru, passes EDID/HDCP signals from source to display
A bidirectional RS-232 interface over which commands and data can flow in
both directions via the RS-232 interface at rates up to 115200, allowing
status requests and control of the destination unit
Bidirectional infrared interface for remote control of peripheral devices (see
Section 5.3)
100BaseT Ethernet interface for connection to a network (see Section 5.5)
LED status indicators for input, output, link and power
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com