This function is used to test various components of the 1:11 HDD Copy Cruiser
1. Press and hold ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
2. Use the arrow buttons (or) to select “H/W Diagnostic”. The following
screen will be displayed.
3. Press ENT to begin the diagnostic tests. The following tests will be
performed: Button Test, Self-Test of SDRAM, Hardware Connection Test,
and Flash Test. Follow the on screen prompts to complete each test. All
test results will be shown in the display panel.
4. When all tests are complete the following information will be displayed.