Loading...
52
MV-5 - Configuring and Operating the MV-5 Remotely
8.3.1 Connecting to the Device
To connect to the device:
1. Click the Connect button.
The Connection Method window shown in Figure 16 appears.
Figure 16: Connection Method Window
2. Select the required method of connection radio button:
For Ethernet, enter the IP address and Port number of the device. To
set the default IP address and Port number, press the Default button
For a serial connection, select the required Com port and baud rate
from the drop-down lists
For a USB connection, select the required USB connection from the
drop-down list
3. Click Connect.
If the connection is successful, the main window shown in Figure 8 appears.
If the connection is not successful, a Timeout error message appears.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com