MV-5 - Configuring and Operating the MV-5 Remotely
8.2.3 Setting the Output Advanced Properties
You can set the output properties, such as, HD and SD formats, and output when
there is no signal input.
To modify the image properties:
1. From the Menu bar, click Display > Advanced Properties.
The Advanced Properties window appears as shown in Figure 11.
Figure 11: Advanced Properties Window
2. Modify the properties as required.
3. Click Close.
The output properties are set.
Output Standard Mode
Selects the output between Forced Output Standard and Auto
Defined by DVI Background Input
Analog HD Output Format
Sets analog HD output format, (RGBHV, RGBS, RGsB, YUV bi-
sync, YUV tri-sync)
Analog SD Output Format
Sets the analog SD output format, (YUV SD, 3 outputs CVBS, YC
and one CVBS)
No Signal Handle Mode
Sets the output when no input is present, (freeze last image, Blue
screen, Black screen, Remove window)
LCD Brightness
Sets the brightness of the LCD backlighting
Sleep Mode Brightness
Sets the brightness of the LCD backlighting when the device is in
sleep mode
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com