Loading...
MV-5 - Configuring and Operating the MV-5 Remotely
45
8.2 The Menu Bar
The menu bar options are shown in the table below.
Note: Any actions that are not valid are grayed out.
Menu Bar
Option
Sub Menu
Description
FILE
Open
Open an existing configuration
Save
Save the current configuration
Exit
Exit the MV-5 Controller software
DEVICE
Connect/Disconnect
Connect to or disconnect from the device (see Section 8.3.1)
Take/Update
Press Take to put the device in off-line mode. Press Update to
implement waiting changes and return the device to on-line
mode (see Section 8.4.2)
Firmware Upgrade
Update the device firmware (see Section 8.2.4)
Device Details
Retrieve and display the device details, such as, model, unit
name, version, and so on (see Section 8.4.2)
DISPLAY
Output Resolution
Set the output resolution
Background Source
Set the background source: Colored, DVI Input
Background Color
Set the background color (see Section 8.2.1)
Background Freeze
Freezes and releases the background: Off, On
Image Properties
Sets the image properties, such as, brightness, contrast and
labeling (see Section 8.2.2)
Advanced Properties
Sets the advanced image properties, such as, output standards
and LCD brightness (see Section 8.2.3)
Refresh
Retrieves full information from the device to update the screen
SETUP
Store
Stores the current configuration in a memory preset
Recall
Recalls the configuration from a memory preset
ABOUT
Displays the Multiviewer Software and Kramer company details (see Section 8.2.6)
8.2.1 Setting the Background Color
You can assign a preset or custom color to the background.
To modify the background color:
1. From the Menu bar, click Display > Background Color.
The Color window appears as shown in Figure 12.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com