Loading...
22
MV-5 - Configuring and Operating the MV-5 Locally
5. Press Menu to exit the setup.
The display changes to show the default Window-Input configuration.
7.1.3 Input Configuration Sub-menu
The Input Configuration sub-menu allows you to assign SD input buttons to
specified connectors, set analog HD input formats, and set the analog HD pixel
phase.
Parameter
Description
Values
Assign Analog SD
Button 1 (or 2, 3 or
4) to:
Assigns one of the four
analog SD input buttons to
the selected input format
CV1, CV2, CV3, CV4, CV5, CV6, CV7,
CV8, CV9, CV10, CV11, CV12, YC1,
YC2, YC3, YC4, YC5, YC6, YUV1,
YUV2, YUV3
DefaultCV1
Analog HD INP1
(or 2, 3 or 4)
Format:
Assigns one of the four
analog HD input buttons to
the selected input format
RGBHV, RGBS, RGsB, YUV BiSync,
YUV TriSync
DefaultRGBHV
Analog HD INP 1
(or 2, 3 or 4) Pixel
Phase:
Assigns the position for
sampling analog HD input
signal
0 to 31
Default0
Analog HD INP 1
(or 2, 3 or 4) Horiz
Start:
Adjusts the horizontal start
for an HD or graphic input
signal
-100 to 100
Default0
Analog HD INP 1
(or 2, 3 or 4)
Vertical Start:
Adjusts the vertical start for
an HD or graphic input
signal
-50 to 50
Default0
DVI INP 1 (or 2, 3,
4 or BackGround)
HDCP capability)
Assigns HDCP capability
for each DVI input
individually
YES, NO
DefaultYES
To set an analog HD input to an input format (for example, Input 2 to format
RGBS):
1. Press Menu.
The last used sub-menu is displayed.
2. Use the up (▲) and down button (▼) to navigate to the Input Configuration
sub-menu.
3. Press Enter.
The Assign Analog SD Button 1 format is displayed.
4. Use the up (▲) and down button (▼) to navigate to the HD Input 2 Format
selection.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com