MV-5 - Configuring and Operating the MV-5 Locally
7 Configuring and Operating the MV-5 Locally
This section describes:
Configuring the MV-5 using the Menu (see Section 7.1)
Operating the MV-5 using the front panel buttons (see Section 7.1.8)
When the MV-5 is powered on, the device performs a self test. If the test is
successful, the Window/Input list is displayed, an example of which is shown
This initial state is the Main mode which is the default Window input configuration.
You can control and adjust window and image geometry using the front panel
buttons from the Main mode without entering the Menu. In the Main mode,
pressing one of the four Windows buttons (the selected button lights yellow) gives
this window the highest priority (1) and places this window of top of the other
windows. All other widows retain their layer order but the priority of each drops by
In the Main mode, using the Inputs buttons, you can switch the input or freeze
layer 1, not the other layers. Pressing the priority 1 layer Window button causes
the layer to become invisible (subsequent layers all increase their priorities by 1)
and the Window button no longer lights.
In the Main mode, layer priority is set by the order in which the Windows buttons
are pressed.
In order to manage other layers without changing all layer priorities, you need to
invoke the Adjustment mode.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com