MV-5 - Connecting the MV-5 5 Channel Multiviewer
6.3.1 Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the MV-5 directly to the Ethernet port on your
PC using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the MV-5
with the factory configured default IP address.
After connecting the MV-5 to the Ethernet port, configure your PC as follows:
1. Click Start > Control Panel > Network and Sharing Center.
2. Click Change Adapter Settings.
3. Highlight the network adapter you want to use to connect to the device and
click Change settings of this connection.
The Local Area Connection Properties window for the selected network
adapter appears as shown in Figure 4.
Figure 4: Local Area Connection Properties Window