Loading...
14
MV-5 - Connecting the MV-5 5 Channel Multiviewer
6.1 Connecting to the MV-5 Using the RS-232 Connection
You can connect to the MV-5 via an RS-232 connection using, for example, a PC.
Note that a null-modem adapter/connection is not required.
To connect to the MV-5 via RS-232:
Connect the RS-232 9-pin D-sub rear panel port on the MV-5 unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC
6.2 Connecting to the MV-5 Using the RS-485 Connection
6.2.1 Connecting via RS-485
You can operate the MV-5 via the RS-485 port from a distance of up to 1200m
(3900ft) using any device equipped with an RS-485 port (for example, a PC).
To connect a device with an RS-485 port to the MV-5:
Connect the A (+) pin on the RS-485 port of the PC to the A (+) pin on the
RS-485 port on the rear panel of the MV-5
Connect the B () pin on the RS-485 port of the PC to the B () pin on the
RS-485 port on the rear panel of the MV-5
Connect the G pin on the RS-485 port of the PC to the G pin on the RS-485
port on the rear panel of the MV-5
If you are using shielded cable, connect the shield only to the G pin of
device 1
6.3 Connecting to the MV-5 Using Ethernet
You can connect to the MV-5 via Ethernet using either of the following methods:
Directly to the PC using a crossover cable (see Section 6.3.1)
Via a network hub, switch, or router, using a straight-through cable (see
Section 6.3.2)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com