Loading...
6
VP-425 - Connecting the VP-425 PC / Component to HDMI Scaler
4 Connecting the VP-425 PC / Component to
HDMI Scaler
Always switch off the power to each device before connecting it to your
VP-425. After connecting your VP-425, connect its power and then
switch on the power to each device.
To connect the VP-425, as illustrated in the example in Figure 2 do the following:
1. Connect a component video source (for example, a DVD player) to the
PC/COMPONENT INPUT 15-pin HD connector as shown in the pinout table
below:
Signal
PIN #
Pr
1
Y
2
Pb
3
Ground
6, 7, 8
Alternatively, you can connect a PC to the 15-pin HD connector
2. Connect an analog stereo audio source (for example, the DVD player audio
signal) to the L and R AUDIO INPUT RCA connectors.
3. Connect the HDMI OUT 15-pin HD connector to an HDMI acceptor (for
example, an LCD display).
4. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 2).
!
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com