Loading...
19
3. Switching the appliance on for the
first time
The appliance should now be switched on for the first
time in order to ensure the accuracy of the following
mounting steps and with it, the appearance of the entire
kitchen frontage.
1. Open the appliance door.
2. Actuate the appliance’s On/Off button.
Only for appliances with a water connection:
In the case of possible damage of the water mains,
keep the shut-off tap closed in order to avoid the risk of
damage from water coming out.
4. Preparing the furniture doors
Important note:
When working on the furniture doors, care should be
taken to the following:
Always carry out screwing jobs on the most stable
part of the furniture door. Never screw into fillings
or similar areas.
Always selects screws with a length smaller than
the thickness of the cabinet front.
Protect the surfaces of the furniture doors during
installation against damage.
The overall weight of the furniture door including the
handle should not exceed the following values:
Instead of one large door, two furniture doors can be
mounted next to each other in the case of appliances
with a width of 76 and 91 cm. These furniture doors are
then connected using a metal strip on the rear.
This metal strip is available from your dealer as an
installation accessory (Connection element for furniture
doors). For further information see section “Tools and
Accessories which are needed”.
When attaching the metal strip to the furniture doors, watch
out for the maximum possible length of the screws and
the position of the drill holes. Always carry out screwing
jobs on the most stable part of the furniture door.
Never screw into fillings or similar areas.
Note:
If only one door is to be mounted to an appliance with
a width of 76 and 91 cm, attach the supplied sandwich
plate to the adjusting rib and fix into position.
5. Loading the appliance door
When attaching the furniture doors it is recommended
to load the storage sections in the door with weights in
order to ensure that the when adjusting crack
dimensions turn out to be as precise as possible.
Loading recommendations:
6. Removing positioning aids
Unscrew the positioning aids from the appliance door.
Note:
The positioning aids will still be needed in the course of
mounting.
Appliance width Overall weight of
the furniture door
76 cm
– Refrigerator door
Freezer drawer
20 kg
11.5 kg
91 cm
– Refrigerator door
Freezer drawer
26 kg
13 kg
Appliance width Loading of the
appliance door
76 cm
– Refrigerator door
Freezer drawer
18 kg
10 kg
91 cm
– Refrigerator door
Freezer drawer
25 kg
10 kg
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com