Loading...
37
Care and Maintenance en-us
Terminating the wash cycle (Reset)
Terminating the wash cycle
1. Open the door.
2. Press the Start button )" and hold for 3 seconds
The digital display @ shows: "Program was
terminated".
3. Close the door.
The wash cycle sequence lasts approx. 1 min. The
digital display @ shows: “Finished”.
4. Open the door.
5. Switch off On/Off switch (.
6. Close the door.
Changing the wash cycle
When the Start button ( has been pressed, the wash
cycle cannot be changed. The only way a wash cycle can
be changed is by terminating the wash cycle (Reset).
2
Care and Maintenance
Care and Maintenance
A regular inspection and maintenance of your machine
will help to prevent faults. This saves time and prevents
future problems.
Overall condition of the dishwasher
Check rinsing compartment for grease and limescale
deposits.
If you find such deposits:
Fill detergent dispenser 9* with detergent. Start
the appliance without utensils in the wash cycle with
the highest rinsing temperature.
9WARNING
Health hazard due to detergents containing
chlorine!
Always use chlorine-free detergents.
NOTICE: Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable for any
resulting damage.
Regularly wipe the front of the appliance with a damp
cloth - water and a small amount of liquid soap is
adequate. Do not use sponges as they could scratch
the surfaces.
Do not use bleach-based wipes as they could
damage the surface or printing.
Stainless steel appliances: To prevent corrosion, do
not use sponges or chlorine based cleaners. Use a
stainless steel polish to seal and protect the surface.
Do not use chlorine based cleaners or wipes.
Clean the outer edges of the inside door panel
regularly to remove debris that may collect from
normal loading. If spots begin to appear on the
stainless steel, make sure the rinse agent is full and
functioning properly.
Clean the door seal regularly with a damp cloth to
remove food particles that may collect from normal
loading and cause odor. A soiled door seal may not
seal properly.
9WARNING
Use caution when removing parts for cleaning as
some debris may be sharp.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com