For Your Safety
The following describes the proper use of the battery and how to prolong its life.
Incorrect use can shorten battery life or cause leakage, overheating, fire, or explosion.
The battery is not charged at shipment. Charge the battery before use. Keep the
battery in its case when not in use.
Notes on the Battery
The battery gradually loses its charge when not in use. Charge the battery one or two
days before use.
Battery life can be extended by turning the camera off when not in use.
Battery capacity decreases at low temperatures; a depleted battery may not function
at when cold. Keep a fully charged spare battery in a warm place and exchange as
necessary, or keep the battery in your pocket or other warm place and insert it in the
camera only when shooting. Do not place the battery in direct contact with hand
warmers or other heating devices.
Charging the Battery
Charge the battery in the supplied battery charger (pg. 5). Charging times will
increase at ambient temperatures below +10°C (+50°F) or above +35 °C (+95 °F). Do
not attempt to charge the battery at temperatures above 40°C (+104°F); at
temperatures below 0 °C (+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged battery. The battery does not however
need to be fully discharged before charging.
The battery may be warm to the touch immediately after charging or use. This is normal.
Battery Life
At normal temperatures, the battery can be recharged about 300 times. A noticeable
decrease in the length of time the battery will hold a charge indicates that it has
reached the end of its service life and should be replaced.
Performance may be impaired if the battery is left unused for extended periods
when fully charged. Run the battery flat before storing it.
If the camera will not be used for an extended period, remove the battery and store
it in a dry place with an ambient temperature of from +15°C to +25°C (+59°F to
+77°F). Do not store in locations exposed to extremes of temperature.
Cautions: Handling the Battery
Do not transport or store with metal objects such as necklaces or hairpins.
Do not expose to flame or heat.
Do not disassemble or modify.
Use with designated chargers only.
Dispose of used batteries promptly.
Do not drop or subject to strong physical shocks.
Do not expose to water.
Keep the terminals clean.
The battery and camera body may become warm to the touch after extended use.
This is normal. Use the AC adapter to power the camera for extended periods.
AC Adapters (Available Separately)
Use only FUJIFILM AC adapters designated for use with this camera. Other adapters
could damage the camera.
The AC adapter is for indoor use only.
Be sure the DC plug is securely connected to the camera.
Turn the camera off before disconnecting the adapter. Disconnect the adapter by
the plug, not the cable.
Do not use with other devices.
Do not disassemble.
Do not expose to high heat and humidity.
Do not subject to strong physical shocks.
The AC adapter may hum or become hot to the touch during use. This is normal.
If the AC adapter causes radio interference, reorient or relocate the receiving
To ensure that images are recorded correctly, do not subject the camera to impact
or physical shocks while images are being recorded.
Electrical Interference
This camera may interfere with hospital or aviation equipment. Consult with hospital
or airline staff before using the camera in a hospital or on an aircraft.
Liquid Crystal
In the event that the monitor is damaged, care should be taken to avoid contact with
liquid crystal. Take the urgent action indicated should any of the following situations
If liquid crystal comes in contact with your skin, clean the area with a cloth and then wash
thoroughly with soap and running water.
If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
If liquid crystal is swallowed, rinse your mouth thoroughly with water. Drink large
quantities of water and induce vomiting, then seek medical assistance.
Take Test Shots
Before taking photographs on important occasions (such as at weddings or before
taking the camera on a trip), take a test shot and view the result in the monitor to
ensure that the camera is functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profits incurred as a result of product malfunction.
The Battery and Power Supply
Using the Camera
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com