Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
mRisk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
Disruption Possible cause Solution
Appliance not working, no display Plug not inserted Connect the appliance to the electricity
Power failure Check whether other kitchen appliances
are working
Fuse defective Check in the fuse box whether the fuse
for the appliance is in working order
Operating error Switch off the fuse for the appliance in
the fuse box and switch it on again after
about 60 seconds
Appliance cannot be started Appliance door is not quite closed Close appliance door
Display of current temperature shows
Continuous signal tone
Power supply was interrupted Move the temperature selector to the 0
position and adjust the oven again.
Appliance switches off on its own. Safety shut-off: the appliance has not
been operated for longer than 12 hours
Switch off the appliance and set it again.
Oven lighting is on, the F symbol is lit
and the appliance is not heating.
Your appliance is in the demo mode 1Disconnect the appliance from the
mains for a few seconds (switch off
the fuse)
2Switch on the fuse again, keep the @
key pressed and set the temperature
switch to any position (not light!).
No time display when the appliance is
switched off
Your appliance is in the energy-saving
standby mode
Changing the basic setting for the time
display: See section entitled "Basic set-
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com