Loading...
4209-51 06-08-09
page 10
SET USER PROFILE #1 or #2
In addition to the default profile, 2 additional user profiles can be set controlling all the features on the main menu plus
auto start times for week days Monday through Friday and weekends including Saturday and Sunday. To program the
user profile, select the desired user number from the TOOL menu by highlighting the desired user and press the
“SELECT / ENTER” button.
The adjustment menus for Duration, Temperature, Fan, Chromatherpy and Aromatherapy will be displayed in order by
pushing the right arrow and are set the same as described previously.
The auto start setting is adjusted by pressing the right arrow after the Chromatherapy menu and the menus below will
be displayed in order. If the auto start feature is going to be used it is important that the steam room door is closed
during any programmed auto start cycle to avoid steam damage outside the steam room.
WEEKDAYS WEEKEND
The auto start on / off is adjusted by using the up or down arrow, and the auto start time (hour, minute, am / pm) are
adjusted in the same manner as setting the clock described above.
RE-SYNC REMOTE TO RF HUB
The re-sync function will likely never need to be used. However, if a component (remote, dock, rf hub or generator
printed circuit assembly) needs replacement, re-syncing may be required. To re-sync, highlight the re-sync icon and
press the select/enter button to go to the re-sync screen and press the select/enter button.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com