Loading...
T100 Steamer Control
Operating Instructions Page 8
4209-53 08-02-11
Autolockolock
Timeime
15 s
Autolockolock
Settingsettings
Statustus
Set Clocket Clock
Language
Language
Displ
Display
Autolockolock
Vibibrationtion
Servivice
Settingsettings
Statustus
Set Clocket Clock
Language
Language
Displ
Display
Autolockolock
Vibibrationtion
Servivice
Vibibrationtion
On
On
Settingsettings
Statustus
Set Clocket Clock
LanguageLanguage
Displ
Display
Autolockolock
Vibibrationtion
Servivice
Settingsettings
Statustus
Set Clocket Clock
LanguageLanguage
Displ
Display
Autolockolock
Vibibrationtion
Servivice
Enter er codeode
0 0 0
Servivice
Max ax tempemp
˚C or C or ˚F
24 or 12 hour24 or 12 hour
Factory y Setet
Testest
Settingsettings
Statustus
Set Clocket Clock
LanguageLanguage
Displ
Display
Autolockolock
Vibibrationtion
Servivice
Settingsettings
Statustus
Set Clocket Clock
LanguageLanguage
Displ
Display
Autolockolock
Vibibrationtion
Servivice 125
Set max et max tempeemperatuture
SETTINGS MENU (continued)
Select Autolock to prevent others from using the
T100. When Autolock is on, The display will light
but the T100 will not respond to key presses.
To set Autolock, fi rst select Time, then adjust the
desired delay time, then press OK. The delay is
15 seconds by default, adjustable from15 to 60
seconds.
Next select OFF and press OK. Autolock is
now enabled. After the selected delay time has
passed, the keyboard will be locked and the
key symbol will be displayed. Repeat to
turn Autolock off again.
To access the T100, press the Home and Back keys at the same
time and hold for about 3 seconds. These two keys may also be used to
manually lock the keypad without turning on Autolock.
Select Vibration to change the effect
when a key is pressed.
By default, when a key is pressed on the T100,
there is a small vibration felt and a buzzing sound.
Select Vibration, use the navigation keys to select
On or Off, then press OK to turn this effect on or off.
Select Service to go to the Service menu. The
Service menu allows setting some personal
options and is passcode protected to prevent
unauthorized use.
Select Service then use the navigation keys to
enter the code 124, then press OK to enter the
Service menu.
SERVICE MENU
Select Max temp to adjust the maximum bath
temperature setting allowed. By default, the bath
maximum temperature is 125°F (51°C). The max.
temperature may be adjusted down from there to
any value.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com