T100 Steamer Control
Operating Instructions Page 3
T100 CONTROL OVERVIEW
The T100 control is a low voltage wired control for use with Amerec’s AT and 3T series steam generators.
The control requires a shielded cable to connect to the steam generator. Failure to use a properly shielded
cable may result in poor performance! A temperature sensor (required) mounts inside the steam room
and connects to the steam generator.
The T100 uses touch screen switches to move through various menu screens to:
start and stop the steam bath
set or display the bath temperature
choose between °F and °C temperature displays
set the bath run time
set a delayed start time for the steam bath
set and display the time of day
choose the displayed language
control a low voltage room light
Note: The T100 will vibrate gently and a buzzing noise may be heard when a switch is pressed. This helps
the user know that the switch was successfully pressed. This may be turned off if desired -- see the Set-
tings menu instructions on page 8.