Loading...
1Set [SOURCE CONTROL 1] to “AUDIO”.
2Set [SOURCE CONTROL 2] to the position for the
component to be operated (CD, iPod/NETWORK or
TUNER).
3Operate the audio component.
b For details, refer to the component’s operating instructions.
b While this remote control is compatible with a wide range of
infrared controlled components, it may be the case that some
component models cannot be operated with this remote control.
1Set [SOURCE CONTROL 1] to “AUDIO” or “VIDEO”.
b Set to the AUDIO side for the CD position, and to the VIDEO side
for the DVD/VDP, VCR, SAT/CABLE or TV position.
2Set [SOURCE CONTROL 2] to the component to be
registered.
3Press [ZONE2 OFF] and [MAIN ON] at the same time.
The indicator starts flashing.
4Press [NUMBER] and input the 3-digit number of the
brand of the component to be preset. The numbers
are shown in the Preset Code Table (vEnd of this
manual).
5To store the codes of another component in the
memory, repeat steps 1 to 4.
The signals for the pressed buttons are emitted while setting the
preset memory. To avoid accidental operation, cover the remote
control unit’s transmitting window while setting the preset
memory.
Depending on the model and year of manufacture, this function
cannot be used for some models, even if they are of makes listed in
the list of preset codes.
Some manufacturers use more than one type of remote control code.
Refer to the included list of preset codes to change the number and
verify correct operation.
The preset memory can be set for one component only among the
following: DVD/VDP and SAT/CABLE.
1Set [SOURCE CONTROL 1] to “AUDIO” or “VIDEO”.
b Set to the AUDIO side for the CD position, and to the VIDEO side
for the DVD/VDP, VCR, SAT/CABLE or TV position.
2Set [SOURCE CONTROL 2] to the component you want
to operate.
3Operate the component.
b For details, refer to the component’s operating instructions.
b Some models cannot be operated with this remote control unit.
Operating DENON Audio Components
Presetting
DENON and other makes of components can be operated by
setting the preset memory.
Operation is not possible for some models.
Operating Preset Components
Depending on the model and year of manufacture of your equipment,
some buttons may not operate.
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]
Main Remote Control Unit
(RC-1099)
[ZONE2 OFF]
[NUMBER]
[MAIN ON]
[Front]
[Rear]

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Remote Control Unit Operations
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com