w qw q
w q w q
The illustration below shows a basic example of installation of the ampliﬁer combined with 8 speakers and
Subwoofer Center speaker
Place the front speakers to the
sides of the monitor or screen and
as ﬂush with the screen surface as
The table below shows a typical speaker conﬁguration for the AVR-2309CI.
Surround back speakers
b L : Left
R : Right
FRONT CENTER SURROUND SURROUND BACK SUBWOOFER
L R L R L R 1 speaker
(FRONT A+B) S S S S S S S –S
7.1-channels S S S S S S S –S
6.1-channels S S S S S – – S S
5.1-channels S S S S S – – – S
3.1-channels S S S – – – – – S
2.1-channels S S – – – – – – S
2-channels S S – – – – – – –
For surround back speakers :
• By default, the AVR-2309CI’s “Amp Assign” setting is set to “ZONE2”. To use as the surround back
speaker for the MAIN ZONE, change the “Amp Assign” setting (vpage 35).
• When using just one surround back speaker, connect it to the left channel (SBL).
For ZONE2 speakers :
• For multi-zone connection and operation, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 69 ~ 72).
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting