1. Introduction
Network equipment sometimes "locks-up", requiring a service call just to flip the power switch to perform
a simple reboot. The TPS Series Telnet Power Switches give network administrators the ability to
perform this function from anywhere on the LAN/WAN, or if the network is down, to simply dial-in from
a modem for out-of-band power control.
Intelligent Power Control
The TPS can communicate over any TCP/IP network using generic Telnet, or out-of-band using an
external modem and terminal emulation. Each outlet can be assigned an individual password, device
name, reboot delay time and unique power-up default status.
Security and Co-Location Features
Address specific IP security masks prevent unauthorized network access to the TPS command mode. The
TPS provides two password security levels; System level and User level. The System password allows
access to all configuration and command functions. The User password allows access only to assigned
plugs. User level security features are ideal for co-location applications, where multiple users may be
allowed plug-specific access to the TPS unit.
Easy to Use, Easy to Configure
Reboots and plug switching are controlled by simple ASCII commands sent to the unit via network,
modem or from a local PC. Set-up and configuration is also simple; easy-to-follow menus lead the user
through the installation process.
·Turn On/Off any AC Powered Device via Telnet, Modem or Local Terminal.
·Two (2) Individual Switched Outlets
·Two Levels of Outlet Specific Password Security plus Network Security.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com