Loading...
4.6. Network Parameters
In order to communicate with the TPS via network, the IP Address, Subnet Mask and Gateway Address
must first be defined via the Network Parameters menu. If desired, this menu also allows you to
implement IP Security features, which can restrict command mode access based on the user's IP Address.
Settings for network parameters depend upon the configuration of your individual network. Please
contact your network administrator for appropriate settings, and then assign parameters as described in
this section.
To access the Network Parameters menu (Figure 7), type /N and press [Enter]. Note that this menu is
not available in User Mode. The following options are available:
1. IP Address: Defines the IP Address for the TPS unit. Type 1press [Enter], and follow the
instructions in the submenu. (Default = undefined)
2. Subnet Mask: Defines the Subnet Mask for the TPS unit. Type 2press [Enter], and follow the
instructions in the submenu. (Default = undefined)
3. Gateway Address: Defines the Gateway Address for the TPS unit. Type 3press [Enter], and
follow the instructions in the submenu. (Default = undefined)
4. IP Security: Sets up the IP Security feature as described in Section 4.6.1.
5. Mac Address: Displays the unit's MAC Address. Note that this item is not used to redefine the
MAC Address.
14
TPS Series Telnet Power Switches; User's Guide Start-Up / Configuration
NETWORK PARAMETERS:
1. IP Address: (undefined)
2. Subnet Mask: (undefined)
3. Gateway Address: (undefined)
4. IP Security
MAC Address: 00-40-05-5e-f3-90
Enter Selection or <ESC> to Exit ...
Figure 7: Network Parameters Menu (System Mode Only)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com