Loading...
8-2
RPC-4850-8N Remote Power Controller - User’s Guide
4. Set your communication program for ASCII Mode, then use the
program’s “Send File” function to transfer the upgrade file to the RPC.
Select ASCII format, then specify the filename and directory location
where the firmware upgrade file resides.
5. If the upload is successful, the RPC will load the upgrade firmware into
memory, and then reboot itself.
Note: If you are performing the upgrade procedure via the Network
Port, the RPC will break the network connection when the system is
reinitialized. However, the RPC will retain the current settings for
the IP Address, the Telnet Port Number, Web Server Port Number and
Console Port Mode and Baud Rate.
6. Incomplete Upload: If the upload is interrupted, times-out, or if the
update file becomes corrupted during transfer, the RPC will display a
screen which asks for confirmation before proceeding. To proceed, type 1
and press [Enter], then return to Step 4 above to retry the upload, or press
[Esc] to reboot the RPC unit.
7. Recovery Mode: In the rare event that the RPC operating system
becomes corrupted during installation, front panel indicators will blink,
and the unit will automatically switch to Recovery Mode. If the unit
switches to Recovery Mode, first access the RPC command mode to reset
the Console Port to 9600 bps, Eight Data Bits, No Parity, One Stop Bit,
and then return to step 3 above and repeat the upload procedure.
When firmware upgrades are available, WTI will provide the necessary
files via download or mailed CDR. At that time, an updated Users Guide or
addendum will also be available.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com