Loading...
6-2
RPC-4850-8N Remote Power Controller - User’s Guide
3. Switching Circuits On: Click the "On" radio button next to the desired
circuit(s), then click "Apply". To switch all circuits On, click the "On"
button in the "All Circuits" row, then click "Apply."
4. Switching Circuits Off: Click the "Off" radio button next to the desired
circuit(s), and then click "Apply". To switch all circuits Off, click the
"Off" button in the "All Circuits" row, and then click "Apply."
5. Reboot Cycles: Click the "Boot" radio button next to the desired
circuit(s), and then click the "Apply" button. To reboot all circuits, click
the "Boot" button in the "All Circuits" row, and then click "Apply."
6. Set Circuits to Power Up Defaults: To set all circuits to their user-
defined Power-Up Default On/Off status, click the "Default" button in
the "All Circuits" row and then click "Apply." Note that in order for this
feature to function properly, Power Up Default values for each circuit
must first be defined as described in Section 5.3.3.
When each switching, default or reboot command is invoked, the RPC will
display a screen which indicates that a switching operation is in progresss, then
return to the Circuit Status screen when the command is complete. At that
time, the Status Screen will list the updated On/Off status of each circuit.
Figure 6.1: Circuit Status Menu - Web Browser Interface (Sample Values Shown)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com