RPC-4850-8N Remote Power Controller - User’s Guide
5.3.5. The Telnet Parameters Menus
The Telnet Parameters Menus are used to enable/disable Telnet access to the
RPC command mode and select the TCP port for Telnet connections.
Web Browser Interface: Click the "Setup" button to access the
configuration menus, and then click the "Telnet Parameters" button to
display the menu shown in Figure 5.12.
Text Interface: Type /T and press [Enter]. The Telnet Parameters
Menu will be displayed as shown in Figure 5.13.
The Telnet Parameters Menus allow the following parameters to be defined.
Please note that all parameters listed here are available via both the Web
Browser Interface and Text Interface.
Service: Enables/Disables Telnet communication with the RPC unit.
When this item is "Off," users will not be able to contact the unit via
Telnet. (Default = On.)
Port Number: Selects the TCP/IP port number that will be used for
Telnet connections. (Default = 23.)
Figure 5.12: Telnet Parameters Menu - Web Browser Interface
1. Service: On
2. Telnet Port #: 23
Enter Selection,
Press <ESC> to Exit ...
Figure 5.13: Telnet Parameters Menu - Text Interface
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com