RPC-4850-8N Remote Power Controller - User’s Guide
5.2. Communicating with the RPC-4850-8N
In order to conﬁgure the unit or invoke command functions, you must ﬁrst
connect to the RPC and access command mode. As discussed in previously,
the RPC offers two separate command interfaces: the Web Browser Interface,
and the Text Interface.
The RPC also offers three different methods for accessing command mode; via
network, via external modem, or via local PC. The Web Browser Interface is
only available when the RPC is contacted via network, and the Text Interface
is available via network, modem or local PC. The sections that follow describe
the procedure for accessing the Web Browser Interface or the Text Interface.
Note: Conﬁguration functions are only available when you have
logged into the RPC command mode using the System Password.
5.2.1. Accessing the Web Browser Interface
In order to use the Web Browser Interface, the RPC must be connected to a
2. Key the RPC’s IP address (default = http://192.168.168.168) into the web
browser’s address bar, and then press [Enter].
Figure 5.1: Circuit Status Screen - Web Browser Interface