Loading...
2-2
RPC-4850-8N Remote Power Controller - User’s Guide
Console Port: A DB9, RS232 serial port (DTE), for connection to a local
terminal or external modem, as described in Section 4.3.
Network Port and Indicators: An RJ45 Ethernet Port for connection
to your TCP/IP network. The default IP Address is 192.168.168.168,
for more information, please refer to Section 4.4. The Indicator lights
adjacent to the Network Port function as follows:
ACT: Flashes to indicate activity at the Network Port.
RDY: Flashes to indicate the Network Port is ready to receive
commands.
Switched Output Circuits: A series of eight -48 VDC, 15 Amp circuits
divided into two terminal blocks.
A. 15 Amp Circuit Breakers: Each circuit includes a 15 Amp breaker.
B. Status Indicators: Each circuit includes a Status Indicator, which
lights when the circuit is switched On.
C. Mounting Screw Receptacles: Each terminal block includes two
mounting screw receptacles, which are used to install the protective
cover (not shown.)
Power Input: Two -48 VDC, 50 Amp input Buses.
D. 50 Amp Circuit Breakers: Each power input bus includes a
50 Amp breaker.
E. Mounting Screw Receptacles: The power input terminal block
includes two mounting screw receptacles, which are used to install
the protective cover (not shown).
50
50
15
15
15
15
15
15
15
15
DEFAULT CONSOLE 10BaseT ACT RDY CKT
1
CKT
2
CKT
3
CKT
4
CKT
5
CKT
6
CKT
7
CKT
8
1 2 3 4 5 6 7 8
BUS A BUS B
Ø -48 Ø Ø Ø Ø Ø Ø Ø-48 -48 -48 -48 -48 -48 -48
-48 -48Ø Ø
12345 6
D
E
AB
C
Figure 2.2: Back Panel
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com