Loading...
5-57
Basic Configuration
5.9.10. RADIUS Parameters
To access the RADIUS Configuration Menus, proceed as follows:
Text Interface: Type /N and press [Enter] to access the Network Configuration
Menu. From the Network Configuration Menu, type 29 and press [Enter] to display
the RADIUS Configuration Menu.
Web Browser Interface: Click on the "RADIUS Parameters" link on the left hand
side of the screen to display the RADIUS Configuration Menu.
The RADIUS Configuration Menus offer the following options:
Enable: Enables/disables the RADIUS feature at the Network Port. (Default = Off.)
Primary Address Defines the IP address or domain name (up to 64 characters
long) for your primary RADIUS server. (Default = undefined.)
Primary Secret Word: Defines the RADIUS Secret Word for the primary RADIUS
server. (Default = undefined.)
Secondary Address: Defines the IP address or domain name (up to 64 characters)
for your secondary, fallback RADIUS server (if present.) (Default = undefined.)
Secondary Secret Word: Defines the RADIUS Secret Word for the secondary
RADIUS server. (Default = undefined.)
Fallback Timer: Determines how long the RSM-8R4 will continue to attempt to
contact the primary RADIUS Server before falling back to the secondary RADIUS
Server. (Default = 3 Seconds.)
Fallback Local: Determines whether or not the RSM-8R4 will fallback to its
own password/username directory when an authentication attempt fails. When
enabled, the RSM-8R4 will first attempt to authenticate the password by checking
the RADIUS Server; if this fails, the RSM-8R4 will then attempt to authenticate the
password by checking its own internal username directory. This parameter offers
three options:
Off: Fallback Local is disabled (Default.)
On (All Failures): Fallback Local is enabled, and the unit will fallback to it's
own internal user directory when it cannot contact the Radius Server, or when a
password or username does not match the Radius Server.
On (Transport Failure): Fallback Local is enabled, but the unit will only fallback
to it's own internal user directory when it cannot contact the Radius Server.
Authentication Port: The Authentication Port number for the RADIUS function.
(Default = 1812.)
Accounting Port: The Accounting Port number for the RADIUS function.
(Default = 1813.)
Debug: (Text Interface Only) When enabled, the RSM-8R4 will put RADIUS debug
information into Syslog. (Default = Off.)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com