Loading...
5-54
Basic Configuration
5.9.8.2 Viewing LDAP Groups
If you want to examine an existing LDAP group definition, the "View LDAP Groups"
function can be used to review the group's parameters and Plug Access Settings. To
view an existing LDAP group on your RSM-8R4 unit, proceed as follows:
Text Interface: Type /N and press [Enter] to display the Network Parameters
Menu. At the Network Parameters Menu, type 27 and press [Enter] to display the
LDAP Parameters menu, then type 13 and press [Enter] to display the LDAP Group
Setup menu. From the LDAP Group Setup menu, type 1 and press [Enter]. The
RSM-8R4 will prompt you to select the desired group; key in the name of the group
and press [Enter], the RSM-8R4 will display the View LDAP Group screen.
Web Browser Interface: At the RSM-8R4 Home Screen, click on the "LDAP
Parameters" link on the left hand side of the screen to display the LDAP Parameters
menu. At the LDAP Parameters menu, click on the LDAP Group Setup button to
display the LDAP Group Setup menu, then click the "View/Modify LDAP Group" link
to display the Choose LDAP Group menu; use the drop down menu to select the
desired group, select "View LDAP Group" and then click the "Choose LDAP Group"
button.
5.9.8.3. Modifying LDAP Groups
If you want to modify an existing LDAP Group in order to change parameters or plug
access rights, the "Modify LDAP Group" function can be used to reconfigure group
parameters. To Modify an existing LDAP Group, access the RSM-8R4 command mode
using a password that permits access to Administrator Level commands, and then
proceed as follows:
Text Interface: Type /N and press [Enter] to display the Network Parameters
Menu. At the Network Parameters Menu, type 27 and press [Enter] to display the
LDAP Parameters menu, then type 13 and press [Enter] to display the LDAP Group
Setup menu. From the LDAP Group Setup menu, type 3 and press [Enter]. The
RSM-8R4 will prompt you to select the desired group; key in the name of the group
and press [Enter], the RSM-8R4 will display the Modify LDAP Group screen.
Web Browser Interface: Click on the "LDAP Parameters" link on the left hand
side of the screen to display the LDAP Parameters menu. At the LDAP Parameters
menu, click on the LDAP Group Setup button to display the LDAP Group Setup
menu, then click the "View/Modify LDAP Group" link to display the Choose LDAP
Group menu; use the drop down menu to select the desired group, select "Modify
LDAP Group" and then click the "Choose LDAP Group" button.
Once you have accessed the Modify LDAP Group menu, use the menu options to
redefine parameters in the same manner that is used for the Add LDAP Group menu, as
discussed in Section 5.9.8.1.
Note: After you have finished modifying LDAP Group parameters, make certain
to save the changes before proceeding. In the Web Browser Interface, click
on the "Modify LDAP Group" button to save parameters; in the Text Interface,
press the [Esc] key several times until the RSM-8R4 displays the "Saving
Configuration" message and the cursor returns to the command prompt.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com