Loading...
5-50
Basic Configuration
SNMPv3 User Name: Sets the User Name for SNMPv3. Note that this option is
not available when the Version parameter is set to V1/V2. (Default = undefined.)
SNMPv3 Password: Sets the password for SNMPv3. Note that this option is not
available when the Version parameter is set to V1/V2. (Default = undefined.)
SNMPv3 Password Confirm: This prompt is used to confirm the SNMPv3
password that was entered at the prompt above. Note that this option is not
available when the Version parameter is set to V1/V2. (Default = undefined.)
Authentication Protocol: This parameter determines which authentication protocol
will be used. The RSM-8R4 supports both MD5 and SHA1 authentication.
(Default = MD5.)
Notes:
The Authentication Protocol that is selected for the RSM-8R4 must match the
protocol that your SNMP client will use when querying the RSM-8R4 unit.
The Authentication Protocol option is not available when the Version
parameter is set to V1/V2
SNMP Contact: (Default = undefined.)
SNMP Location: (Default = undefined.)
SNMP Community: Note that this parameter is not available when the SNMP
Version is set to V3. (Default = Public.)
5.9.7. SNMP Trap Parameters
These menus are used to select parameters that will be used when SNMP traps are
sent. For more information on SNMP Traps, please refer to Section 12. To define or
change SNMP Trap parameters, proceed as follows:
Text Interface: Type /N and press [Enter] to display the Network Parameters
Menu. At the Network Parameters Menu, type 26 and press [Enter] to display the
SNMP Trap Menu.
Web Browser Interface: Click on the "SNMP Traps" link on the left hand side of the
RSM-8R4 Home screen to display the SNMP Traps menu.
Both the Text Interface and Web Browser Interface allow the following parameters to be
defined:
SNMP Manager 1: The IP Address for the first SNMP Manager. For more
information, please refer to Section 12. (Default = Undefined.)
Note: In order to enable the SNMP Trap feature, you must define at least one
SNMP Manager.
SNMP Manager 2: (Default = Undefined.)
Trap Community: (Default = Public.)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com