Loading...
5-48
Basic Configuration
5.9.4. Static Route
The Static Route menu allows you to type in Linux routing commands that will be
automatically executed each time that the unit powers up or reboots. In the Text
Interface, the Static Route menu is accessed via item 6 in the Network Configuration
menu. In the Web Browser Interface, the Static Route menu is accessed by clicking the
Static Route link, located on the left-hand side of the screen.
To access the Static Route Menus, proceed as follows:
Text Interface: Type /N and press [Enter] to display the Network Parameters
Menu. At the Network Parameters Menu, type 6 and press [Enter] to display the
Static Route Menu.
Web Browser Interface: Click on the "Static Route" link on the left hand side of the
screen to display the Static Route Menu.
5.9.5. Domain Name Server
The DNS menu is used to select IP addresses for Domain Name Servers. When web
and network addresses are entered, the Domain Name Server interprets domain names
(e.g., www.wti.com), and translates them into IP addresses. Note that if you don't define
at least one DNS server, then IP addresses must be used, rather than domain names.
To access the Domain Name Server Menu, proceed as follows:
Text Interface: Type /N and press [Enter] to display the Network Parameters
Menu. At the Network Parameters Menu, type 7 and press [Enter] to display the
Domain Name Server menu.
Web Browser Interface: Click on the "DNS Server" link to display the Domain
Name Server menu.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com