Loading...
3-4
Getting Started
3. Controlling Outlets: You may wish to perform the following tests in order to make
certain that the switched outlets are functioning properly.
a) Reboot Outlet: At the command prompt, type /BOOT 1 and press [Enter].
The status indicator for Plug 1 should go Off, pause for a moment and then go
back On, indicating that the boot cycle has been successfully completed.
b) Switch Outlet Off: At the command prompt, type /OFF 1 and then press
[Enter]. The status indicator for Plug 1 should go Off, indicating that the
command has been successfully completed. Leave Plug 1 in the "Off" state,
and then proceed to the next step.
c) Switch Outlet On: At the command prompt, type /ON 1 and press [Enter].
The status indicator for Plug 1 should then go back On, indicating that the
command has been successfully completed.
4. Exit Command Mode: To exit command mode, type /X and press [Enter].
This completes the Quick Start procedure for the RSM-8R4. Prior to placing the unit into
operation, it is recommended to refer to the remainder of this user’s guide for important
information regarding advanced configuration capabilities and more detailed operation
instructions. If you have further questions regarding the RSM-8R4 unit, please contact
WTI Customer Support as described in Appendix C.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com