Appendix C. Specifications
Power Input/Output:
Voltage: 100 - 120 VAC or 208 - 240 VAC, 50/60 Hz
AC Input Feed:
120 VAC Models: 20 Amps Max. Input Feed
240 VAC Models: 16 Amps Max. Input Feed
AC Inlets: Two (2) IEC320-C20
AC Outlets:
120 VAC Models: 4 each, NEMA 5-15R Outlets
240 VAC Models: 4 each, IEC320-C13 Outlets
RS232 Port Interface:
Connectors: Eight (8) RJ45 connectors (DTE pinout.)
Coding: 7/8 bits, Even, Odd, No Parity, 1, 2 Stop Bits.
Flow Control: XON/XOFF, RTS/CTS, Both, or None.
Data Rate: 300 to 115.2K bps (all standard rates).
Inactivity Timeout: No activity timeout disconnects port/modem sessions.
Off, 5, 15, 30, 90 minutes.
Break: Send Break or Inhibit Break
Site ID: 32 Characters.
Port Name: 16 Characters per port.
Usernames & Passwords: 32 character usernames; 16 character passwords (case
sensitive.) Up to 128 pairs, definable port, plug and system access.
Internal Modem: V.34
Width: 19” (48.3 cm) (Including Rack Brackets)
Depth: 8.7” (16.5 cm)
Height: 1.75” (4.5 cm) One Rack U
Operating Temperature: 32˚F to 122˚F (0˚C to 50˚C)
Humidity: 10 - 90% RH
Agency Approvals: FCC, UL, CE (240 VAC Units)
Venting: Side vents are used to dissipate heat generated within the unit. When
mounting the unit in an equipment rack, make certain to allow adequate
clearance for venting.
Control Ports:
Ethernet Port: 100Base-T
Serial Console Ports: 8 each, RJ45, RS232C
Internal Modem Port (Phone Line): RJ11 connector for connection to your telco line
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com