Operation Applying Commands to Several Plugs - Text Interface
As described below, switching and reboot commands can be applied to only one
Switched AC Outlet, or to an assortment of outlets.
Note: When switching and reboot operations are initiated, Boot/Sequence
Delay times will be applied as described in Section 5.7.
1. Switch Several Plugs: To apply a command to several plugs, enter the numbers
or names for the plugs, separated by a "plus sign" (+) or a comma (,). For example
to switch plugs 1, 3, and 4 Off, enter either of the following commands:
/OFF 1+3+4 [Enter]
/OFF 1,3,4 [Enter]
Note: When the "+" or "," are used, do not enter spaces between the plug
name or number and the plus sign or comma.
2. Switch a Series of Plugs: To apply a command to a series of plugs, enter the
number for the plugs that mark the beginning and end of the series, separated by a
colon. For example to switch On plugs 1 through 3, enter the following:
/ON 1:3 [Enter]
4. All Plugs: To apply a command to all plugs, enter an asterisk in place of the name
or number. For example, to Boot all plugs, enter the following:
/BO * [Enter]
Note: When this command is invoked by an account that permits only User
level command access, it will be applied only to the plugs that are allowed for
that account.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com