^B25 Clear Memory to Partition
Clears all call records in the current memory partition. Records received while Command
^B25 is in progress are stored on the other side of the partition, and will not be effected.
CAUTION: Command ^B25 will erase all records in the current memory
partition, regardless of whether the records have been read. Make certain you
have retrieved all desired data before issuing this command.
If Command ^B25 is invoked, and the "SURE?" option is enabled (^B75,2), a prompt will be
displayed. Type Y[Enter] to erase data, or type N[Enter] to abort.
^B25 Clear both Data and Alarm Records or blocks in the current memory partition.
^B25,D Clear Data Records or blocks only (Does not release memory space).
^B25,A Clear Alarm Records or blocks only (Does not release memory space).
^B27 Send Continuous Test Message
Tests the modem transmitter. When Command ^B27 is invoked, the unit will send a continuous
test message, which reads "This is a test of the PollCat III 1234567890". To initiate the test,
type ^B27 [Enter]. To terminate the test, type ^B30 [Enter].
^B28 Enter Echo Test Mode
Tests the modem receiver. When Command ^B28 is invoked, PollCat III will echo back a test
character. If characters are not echoed back, this can indicate that the modem is not receiving
properly. To initiate the test, type ^B28 [Enter]. To terminate the test, type ^B30 [Enter].
PollCat III - Pollable Call Accounting Terminal, User's Guide Command Reference Guide