Loading...
8.1. ^B99 Command Options
Command ^B99 can be invoked with a variety of different options. These options are designed
to streamline the upload/download process by sending only specific parameters, and/or
arranging data in a manner where several parameters are combined in a single, continuous line.
Notes:
When parameters are saved to an ASCII file, the "^A" character is substituted for
the "^B" character. If the ASCII file is uploaded to the PollCat III, the ^A
character allows commands to be executed without echoing back to the polling
device.
With the exception of options ^B99,* and ^B99 (plain), each set of parameters
will be listed in a single, continuous line, terminated by <CR><LF>.
Alarm Filter Parameters (defined using Command ^B81) will only be saved when
options ^B99,* and ^B99 (plain) are invoked. Options ^B99,1 through ^B99,9
will not include Alarm Filter Parameters.
Command ^B99 offers the following options:
^B99 All Parameters, Line by Line: Downloads all parameters specified in
Table 8.1. Each parameter is listed on a separate line,
terminated by <CR><LF>.
^B99,* All Parameters, Condensed: Downloads all parameters specified in Table 8.1.
In order to streamline the upload/download process, several parameters
are included on each line. Each line is terminated by <CR><LF>.
^B99,0 "00" Series Parameters: Downloads parameters for Commands ^B04
(Banner Message / Auto Execute / Report Command) and ^B05
(EOR Character).
^B99,1 ^B12 Callback Schedule Parameters: Downloads parameters for Command
^B12 (Callback Schedule).
^B99,2 ^B14 Callback Parameters: Downloads parameters defined under Command
^B14 (Callback Parameters).
^B99,3 ^B15 No-Data Alarm Parameters: Downloads parameters for the No-Data
Alarm, defined under Command ^B15.
^B99,4 "40" Series Command Parameters: Downloads parameters for Commands
^B40 (Data Filter Format), ^B42 (Data Filter Parameters), and
^B44 (Alarm Filter Format).
^B99,5 "50" Series Command Parameters: Downloads parameters for Commands
^B52 (Hold "End Data"), ^B53 (Compression), ^B54 (Release Data with ^B02),
^B55 (Non-Printable Codes), ^B56 (Enable Data Filter), ^B57 (XON/XOFF),
^B58 (Response Message Type), and ^B59 (Line I.D.).
^B99,6 "60" Series Command Parameters: Downloads parameters for Commands
^B62 (Output Format), ^B63 (CRC Option), ^B64 (Wrap Around Mode),
^B65 (Enable Alarm Filter), ^B66 (Time/Date Stamp),
^B67 (Auto Delete Option), ^B68 (Duplex Mode), and ^B69
(Enable Auto Execute Option).
8-2
PollCat III - Pollable Call Accounting Terminal, User's Guide Saving PollCat III Parameters
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com