Loading...
Pass-Through Mode:
1. From PollCat III's Command Mode, Invoke Command ^B29 to access the PBX connected
to PBX Port A or B.
a) To access the PBX connected to PBX Port A, type ^B29,A [Enter]. The system will
display the "PBX-A READY" message.
b) To access the PBX connected to PBX Port B, type ^B29,B [Enter]. The system will
display the "PBX-B READY" message.
c) If you are communicating with the PollCat III via the Modem Port, you can also
access the device connected to the Computer Port. Type ^B29,C [Enter], the
system will display the "READY" message.
2. To exit Pass-Through Mode and return to Command Mode, type ^B30 [Enter].
Monitor Mode:
1. From PollCat III's Command Mode, Invoke Command ^B94 to access the PBX connected
to PBX Port A or B.
a) To access the PBX connected to PBX Port A, type ^B94,A [Enter]. The system will
display the "PBX-A READY" message.
b) To access the PBX connected to PBX Port B, type ^B94,B [Enter]. The system will
display the "PBX-B READY" message.
c) If you are communicating with the PollCat III via the Modem Port, you can also
access the device connected to the Computer Port. Type ^B94,C [Enter], the
system will display the "READY" message.
2. To exit Monitor Mode and return to Command Mode, type ^B30 [Enter].
7-20
PollCat III - Pollable Call Accounting Terminal, User's Guide The Alarm Filter (Toll Fraud Detection)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com