Loading...
Table of Contents
1. Introduction .......................................................1-1
2. Unit Description .....................................................2-1
2.1. Front Panel Indicators ..............................................2-1
2.2. Back Panel .....................................................2-2
3. Hardware Installation .................................................3-1
3.1. Set-Up Switches..................................................3-1
3.1.1. Default Baud Rate for Computer Port (Sw1, Sw2, Sw3) .....................3-1
3.1.2. Default Baud Rate for PBX Input Ports A and B (Sw4, Sw5) ..................3-2
3.1.3. Direct Connect Mode (Sw6) .....................................3-2
3.1.4. Computer Port Password (Sw7) ...................................3-3
3.1.5. Power Up Default (Sw8) .......................................3-3
3.2. Connecting the Data Cables and Telephone Line ...............................3-4
3.2.1. PBX Inputs A and B..........................................3-4
3.2.2. Modem Port ..............................................3-5
3.2.3. Computer Port .............................................3-5
3.3. Connect the AC Power Cable ..........................................3-5
4. Program Set-Up .....................................................4-1
4.1. Initial Set-Up ...................................................4-1
4.1.1. Reset Default Parameters / Clear Memory .............................4-1
4.1.2. Set General Parameters ........................................4-2
4.2. Define PBX Data Input Format .........................................4-5
4.2.1. Define End-of-Record Character ..................................4-5
4.2.2. "Strip Non-Printable Codes" Function ...............................4-5
4.2.3. Time/Date Stamp Function ......................................4-6
4.2.4. Enable/Disable Wrap Around Mode.................................4-6
4.3. Define Data Output Format ...........................................4-6
4.3.1. Select/Configure Data Output Mode ................................4-7
4.3.2. The CRC Function ..........................................4-10
4.3.3. The Line I.D. Function .......................................4-10
4.3.4. Select Compression Mode .....................................4-10
4.3.5. Release Data with Command ^B02 ................................4-10
4.3.6. Hold "END DATA" Message ....................................4-11
4.4. Callback Features ................................................4-11
4.4.1. Define Callback Parameters ....................................4-11
4.4.2. Scheduled Callback .........................................4-14
4.4.3. 80% Full Callback ..........................................4-15
4.4.4. Immediate Callback .........................................4-15
4.4.5. No-Data Alarm ............................................4-16
4.4.6. Toll Fraud Alarm ...........................................4-16
4.5. Define Header Message/Auto Execute Command/Report Mode Command String ...........4-16
4.5.1. Header Message ...........................................4-16
4.5.2. The Auto Execute Command ....................................4-17
4.5.3. The Report Mode Command String ................................4-18
4.6. The Data Filter ..................................................4-18
4.7. The Alarm Filter (Toll Fraud Alarm) .....................................4-18
5. The No-Data Alarm ...................................................5-1
5.1. Timer Schedules..................................................5-1
5.2. Enabling the No-Data Alarm ..........................................5-2
i
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com