Loading...
MIXING AMPLIFIER
6PA-60A/120A/240A
Rear Panel
Rear Panel
1. AC POWER INPUT TERMINAL
It is a terminal to supply power to this device. The power used for this is AC 220-240V, 50/60Hz. Do not
bend by force, pull, twist, heat, or cut the power cord. It may cause a fire or electric shock by damaging the cord.
2. TEL IN VOLUME CONTROLLER
It is a controller to control the volume of TEL IN input. Use by controlling to desired volume.
3. TEL IN PRIORITY CONTROL VOLUME (TEL IN MUTE)
This is a volume that adjusts the volume of INPUT 1, CHIME, and SIREN sound when a signal is input to the
TEL IN. By using TEL IN priority adjustment volume, user can adjust the input signal to INPUT 1, CHIME, and
SIREN. By using priority adjustment volume of INPUT 1, user can adjust the volume of INPUT 2 ~ 6, EXT IN.
4. MIX OUTPUT (MIX OUT) TERMINAL
It is an output terminal to connect when recording the sound printed from this device or using other amps in
parallel. It is a balanced type and pin arrangements are +, -, G.
5. RM-05A CONNECTION TERMINAL
It is a terminal to use by connecting our RM-05A. Pin arrangement of the terminal is as follows:
1 2 3 5 764
98 10 11 12 13
Pin 1: Remote amplifier input signal hot (+) Pin 9: Remote control ground
Pin 2: Remote amplifier input signal cold (-) Pin 10: DC +24V
Pin 3: Signal ground Pin 11: Remote chime
Pin 4: Remote control 1 (SP1) Pin 12: NC
Pin 5: Remote control 2 (SP2) Pin 13: NC
Pin 6: Remote control 3 (SP3) Pin 14: NC
Pin 7: Remote control 4 (SP4) Pin 15: NC
Pin 8: Remote control 5 (SP5)
12345678
9
101112131415
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com