PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
6. Define the Data Filter Format: The prompt at the bottom of the menu
is used to define the Data Filter.
a) Press the dash key to indicate a field position that you do not need
to monitor. The last line in Figure 8.3 shows a Data Filter Format
where dashes have been entered in the first four fields of the
call record.
b) When you reach a field you want to monitor, type a series of
variables (any uppercase letter from A to Z) to assign that variable
to the position. For example, to assign the variable "A" to
represent the first seven digits of the number dialed, enter seven
A's (AAAAAAA). The same variable is repeated for each position
in the field. It is not necessary to define variables in
alphabetic order.
c) When you reach the end of the call record, or the last position you
need to monitor, press [Enter]. The Data Filter Format will be
saved, and the VIP will return to the Data Filter
Configuration menu.
8.3. Defining Data Filter Clues
Data Filter match parameters describe the specific criteria that the VIP
will use to determine if call records should be stored or rejected. Storage/
rejection criteria are referred to as "Clues". Parameters can be combined
under a single Clue, or divided between a series of Clues to create a logical
"OR" condition.
In order to assist the user during format definition, several data records
and the previous format are displayed in the following order:
Data Records (If available)
Previous Format (If available)
Enter new format at cursor.
<Space><Enter> to clear.
Use upper case letters for fields,
'-' between fields
|08:16|075|B.JOHNSON |IN | |00:55|00.00|
|08:18|067|R.JONES |OUT|19495839514 |05:36|00.75|
|08:20|092|J.SMITH |OUT|18008547226 |11:15|00.00|
---------+---------+---------+---------+---------+---------+---------+--------- ----
Figure 8.3: Data Filter Format Definition Example
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com